Month: January 2009

Upgrading the Fujitsu U810 with 64GB SSD

Posted on by Andre Beckedorf

I recently decided to upgrade my Fujitsu U810 with a solid state drive.
Unfortunately, since the U810 only offers a PATA interface the options are quite limited to just a few high-priced (compared to SATA) 1.8″ SSD models by either Samsung, Sandisk (SanDisk SSD UATA 5000, discontinued) or MTRON (MSD-PATA3018-032-ZIF2 et al.).
I went for a 64 GB SLC drive manufactured by Samsung. The exact model name is MCCOE64GEMPP. The same 1.8″ PATA-drive is available as bulk version without the metal enclosure that is protecting the PCB: MCCOE64GQMPQ

Here are some photos of the drive itself and how to install it in the U810. Note, the drive is 5 mm high and will fit into the U810 without any modifications.
Also keep in mind that the U1010 has a different connector (50-pin IDE instead of ZIF), so these ZIF-drives will not work here. However, there are reports on UMPC Portal that suggest that it is possible to get a replacement connector flat band cable for the U810 that is the 50pin IDE cable, so I guess it is also possible the other way around for the U1010.


dsc00321dsc00323
dsc00238dsc00324

Here are the obligatory benchmarks comparing the new SSD against the old Toshiba MK1011GAH 100 GB hard drive that was previously installed in the U810:


Toshiba MK1011GAH:

hdtune_info_toshiba_mk1011gahhdtune_benchmark_toshiba_mk1011gah
crystal50crystal100crystal500


Samsung MCCOE64GEMPP:

hdtune_info_samsung_pza064_ssdhdtune_benchmark_samsung_pza064_ssd
crystal50_samsung_pza064_ssdcrystal100_samsung_pza064_ssdcrystal500_samsung_pza064_ssd

Needless to say that applications cold-launch a lot faster with the SSD. (Firefox with 12 add-ons: ~10 s before -> ~6 s after, Chrome: ~3 s before, ~1 s after, Thunderbird: ~8 s before -> ~3 s after).

Startup time was reduced quite a bit but not dramatically. However, returning from sleep and hibernate saw a huge improvement. Unfortunately I can not provide values of the old drive, so no comparison.
I did not notice longer battery run times. However, the whole system runs a lot cooler because the SSD naturally does not produce heat as extensive as the HDD did.

I am satisfied with this upgrade – especially since it has boosted compile-times when working with CodeGear RAD Studio and Delphi – due to the great performance when accessing, reading and writing small files. Your mileage may vary.

Installing Windows 7 on Fujitsu U810, U1010, U2010, U2020

Posted on by Andre Beckedorf

UPDATE: This also applies to Windows 7 Final/RTM (7600) and will also work for the U820/U2010/U2020 models. Check my comment for additional information on what needs to be installed on those models.

I just installed Windows 7 Business Build 7000 on my U810. It is quite nice actually and seems to run faster than Vista.

windows7capture2windows7capture1

I installed the Vista drivers from the driver CD. The Setup.exe on the driver CD will complain that the operating system is unsupported. To circumvent this problem, just start the setup in Vista compatibility mode:
Right-click on “Setup.exe”, “Properties” -> “Compatibility” -> “Run this program in compatibility mode for:” “Windows Vista”.

Install these items:

Drivers
04. Button Driver
05. Camera Driver
07. Fingerprint sensor (driver)
08. FUJ02B1 Device Driver (HotKey Driver)
09. FUJ02E3 Device Driver (System Extension Driver)
11. Pen Driver
12. Pointer device driver

Utilities/Applications
03. Button Utilities
07. Fujitsu System Extension Utilities

I could not get the Auto-Rotation feature to work. Also, you’ll probably have to calibrate the touch screen.
I also disabled the power management feature of the FCL USB Pen Tablet in Device Manager (Right-click on “Human Interface Devices/FCL USB Pen Tablet”, “Properties” -> “Power Management” -> Disable “Allow the computer to turn off this device to save power”). This improves the response of the touch-screen/tablet.

Oh, and BTW, Windows 7 “only” uses 7.5 GB of disk space, whereas Vista uses 15 GB I think.