The QVideoFrame class provides a representation of a frame of video data. More...
#include <QVideoFrame>
This class was introduced in Qt 4.6.
| enum | FieldType { ProgressiveFrame, TopField, BottomField, InterlacedFrame } |
| enum | PixelFormat { Format_Invalid, Format_ARGB32, Format_ARGB32_Premultiplied, Format_RGB32, ..., Format_User } |
| QVideoFrame () | |
| QVideoFrame ( QAbstractVideoBuffer * buffer, const QSize & size, PixelFormat format ) | |
| QVideoFrame ( int bytes, const QSize & size, int bytesPerLine, PixelFormat format ) | |
| QVideoFrame ( const QImage & image ) | |
| QVideoFrame ( const QVideoFrame & other ) | |
| ~QVideoFrame () | |
| uchar * | bits () |
| const uchar * | bits () const |
| int | bytesPerLine () const |
| qint64 | endTime () const |
| FieldType | fieldType () const |
| QVariant | handle () const |
| QAbstractVideoBuffer::HandleType | handleType () const |
| int | height () const |
| bool | isMapped () const |
| bool | isReadable () const |
| bool | isValid () const |
| bool | isWritable () const |
| bool | map ( QAbstractVideoBuffer::MapMode mode ) |
| QAbstractVideoBuffer::MapMode | mapMode () const |
| int | mappedBytes () const |
| PixelFormat | pixelFormat () const |
| void | setEndTime ( qint64 time ) |
| void | setFieldType ( FieldType field ) |
| void | setStartTime ( qint64 time ) |
| QSize | size () const |
| qint64 | startTime () const |
| void | unmap () |
| int | width () const |
| QVideoFrame & | operator= ( const QVideoFrame & other ) |
| QImage::Format | imageFormatFromPixelFormat ( PixelFormat format ) |
| PixelFormat | pixelFormatFromImageFormat ( QImage::Format format ) |
The QVideoFrame class provides a representation of a frame of video data.
A QVideoFrame encapsulates the data of a video frame, and information about the frame.
The contents of a video frame can be mapped to memory using the map() function. While mapped the video data can accessed using the bits() function which returns a pointer to a buffer, the total size of which is given by the mappedBytes(), and the size of each line is given by bytesPerLine(). The return value of the handle() function may be used to access frame data using the internal buffer's native APIs.
The video data in a QVideoFrame is encapsulated in a QAbstractVideoBuffer. A QVideoFrame may be constructed from any buffer type by subclassing the QAbstractVideoBuffer class.
Note: QVideoFrame is explicitly shared, any change made to video frame will also apply to any copies.
Specifies the field an interlaced video frame belongs to.
| Constant | Value | Description |
|---|---|---|
| QVideoFrame::ProgressiveFrame | 0 | The frame is not interlaced. |
| QVideoFrame::TopField | 1 | The frame contains a top field. |
| QVideoFrame::BottomField | 2 | The frame contains a bottom field. |
| QVideoFrame::InterlacedFrame | 3 | The frame contains a merged top and bottom field. |
Enumerates video data types.
| Constant | Value | Description |
|---|---|---|
| QVideoFrame::Format_Invalid | 0 | The frame is invalid. |
| QVideoFrame::Format_ARGB32 | 1 | The frame is stored using a 32-bit ARGB format (0xAARRGGBB). This is equivalent to QImage::Format_ARGB32. |
| QVideoFrame::Format_ARGB32_Premultiplied | 2 | The frame stored using a premultiplied 32-bit ARGB format (0xAARRGGBB). This is equivalent to QImage::Format_ARGB32_Premultiplied. |
| QVideoFrame::Format_RGB32 | 3 | The frame stored using a 32-bit RGB format (0xffRRGGBB). This is equivalent to QImage::Format_RGB32 |
| QVideoFrame::Format_RGB24 | 4 | The frame is stored using a 24-bit RGB format (8-8-8). This is equivalent to QImage::Format_RGB888 |
| QVideoFrame::Format_RGB565 | 5 | The frame is stored using a 16-bit RGB format (5-6-5). This is equivalent to QImage::Format_RGB16. |
| QVideoFrame::Format_RGB555 | 6 | The frame is stored using a 16-bit RGB format (5-5-5). This is equivalent to QImage::Format_RGB555. |
| QVideoFrame::Format_ARGB8565_Premultiplied | 7 | The frame is stored using a 24-bit premultiplied ARGB format (8-6-6-5). |
| QVideoFrame::Format_BGRA32 | 8 | The frame is stored using a 32-bit ARGB format (0xBBGGRRAA). |
| QVideoFrame::Format_BGRA32_Premultiplied | 9 | The frame is stored using a premultiplied 32bit BGRA format. |
| QVideoFrame::Format_BGR32 | 10 | The frame is stored using a 32-bit BGR format (0xBBGGRRff). |
| QVideoFrame::Format_BGR24 | 11 | The frame is stored using a 24-bit BGR format (0xBBGGRR). |
| QVideoFrame::Format_BGR565 | 12 | The frame is stored using a 16-bit BGR format (5-6-5). |
| QVideoFrame::Format_BGR555 | 13 | The frame is stored using a 16-bit BGR format (5-5-5). |
| QVideoFrame::Format_BGRA5658_Premultiplied | 14 | The frame is stored using a 24-bit premultiplied BGRA format (5-6-5-8). |
| QVideoFrame::Format_AYUV444 | 15 | The frame is stored using a packed 32-bit AYUV format (0xAAYYUUVV). |
| QVideoFrame::Format_AYUV444_Premultiplied | 16 | The frame is stored using a packed premultiplied 32-bit AYUV format (0xAAYYUUVV). |
| QVideoFrame::Format_YUV444 | 17 | The frame is stored using a 24-bit packed YUV format (8-8-8). |
| QVideoFrame::Format_YUV420P | 18 | The frame is stored using an 8-bit per component planar YUV format with the U and V planes horizontally and vertically sub-sampled, i.e. the height and width of the U and V planes are half that of the Y plane. |
| QVideoFrame::Format_YV12 | 19 | The frame is stored using an 8-bit per component planar YVU format with the V and U planes horizontally and vertically sub-sampled, i.e. the height and width of the V and U planes are half that of the Y plane. |
| QVideoFrame::Format_UYVY | 20 | The frame is stored using an 8-bit per component packed YUV format with the U and V planes horizontally sub-sampled (U-Y-V-Y), i.e. two horizontally adjacent pixels are stored as a 32-bit macropixel which has a Y value for each pixel and common U and V values. |
| QVideoFrame::Format_YUYV | 21 | The frame is stored using an 8-bit per component packed YUV format with the U and V planes horizontally sub-sampled (Y-U-Y-V), i.e. two horizontally adjacent pixels are stored as a 32-bit macropixel which has a Y value for each pixel and common U and V values. |
| QVideoFrame::Format_NV12 | 22 | The frame is stored using an 8-bit per component semi-planar YUV format with a Y plane (Y) followed by a horizontally and vertically sub-sampled, packed UV plane (U-V). |
| QVideoFrame::Format_NV21 | 23 | The frame is stored using an 8-bit per component semi-planar YUV format with a Y plane (Y) followed by a horizontally and vertically sub-sampled, packed VU plane (V-U). |
| QVideoFrame::Format_IMC1 | 24 | The frame is stored using an 8-bit per component planar YUV format with the U and V planes horizontally and vertically sub-sampled. This is similar to the Format_YUV420P type, except that the bytes per line of the U and V planes are padded out to the same stride as the Y plane. |
| QVideoFrame::Format_IMC2 | 25 | The frame is stored using an 8-bit per component planar YUV format with the U and V planes horizontally and vertically sub-sampled. This is similar to the Format_YUV420P type, except that the lines of the U and V planes are interleaved, i.e. each line of U data is followed by a line of V data creating a single line of the same stride as the Y data. |
| QVideoFrame::Format_IMC3 | 26 | The frame is stored using an 8-bit per component planar YVU format with the V and U planes horizontally and vertically sub-sampled. This is similar to the Format_YV12 type, except that the bytes per line of the V and U planes are padded out to the same stride as the Y plane. |
| QVideoFrame::Format_IMC4 | 27 | The frame is stored using an 8-bit per component planar YVU format with the V and U planes horizontally and vertically sub-sampled. This is similar to the Format_YV12 type, except that the lines of the V and U planes are interleaved, i.e. each line of V data is followed by a line of U data creating a single line of the same stride as the Y data. |
| QVideoFrame::Format_Y8 | 28 | The frame is stored using an 8-bit greyscale format. |
| QVideoFrame::Format_Y16 | 29 | The frame is stored using a 16-bit linear greyscale format. Little endian. |
| QVideoFrame::Format_User | 1000 | Start value for user defined pixel formats. |
Constructs a null video frame.
Constructs a video frame from a buffer of the given pixel format and size in pixels.
Note: This doesn't increment the reference count of the video buffer.
Constructs a video frame of the given pixel format and size in pixels.
The bytesPerLine (stride) is the length of each scan line in bytes, and bytes is the total number of bytes that must be allocated for the frame.
Constructs a video frame from an image.
Note: This will construct an invalid video frame if there is no frame type equivalent to the image format.
See also pixelFormatFromImageFormat().
Constructs a copy of other.
Destroys a video frame.
Returns a pointer to the start of the frame data buffer.
This value is only valid while the frame data is mapped.
See also map(), mappedBytes(), and bytesPerLine().
Returns a pointer to the start of the frame data buffer.
This value is only valid while the frame data is mapped.
See also map(), mappedBytes(), and bytesPerLine().
Returns the number of bytes in a scan line.
Note: This is the bytes per line of the first plane only. The bytes per line of subsequent planes should be calculated as per the frame type.
This value is only valid while the frame data is mapped.
See also bits(), map(), and mappedBytes().
Returns the presentation time when a frame should stop being displayed.
See also setEndTime().
Returns the field an interlaced video frame belongs to.
If the video is not interlaced this will return WholeFrame.
See also setFieldType().
Returns a type specific handle to a video frame's buffer.
For an OpenGL texture this would be the texture ID.
See also QAbstractVideoBuffer::handle().
Returns the type of a video frame's handle.
Returns the height of a video frame.
Returns an image format equivalent to a video frame pixel format. If there is no equivalent format QImage::Format_Invalid is returned instead.
Identifies if a video frame's contents are currently mapped to system memory.
This is a convenience function which checks that the MapMode of the frame is not equal to QAbstractVideoBuffer::NotMapped.
Returns true if the contents of the video frame are mapped to system memory, and false otherwise.
See also mapMode() and QAbstractVideoBuffer::MapMode.
Identifies if the mapped contents of a video frame were read from the frame when it was mapped.
This is a convenience function which checks if the MapMode contains the QAbstractVideoBuffer::WriteOnly flag.
Returns true if the contents of the mapped memory were read from the video frame, and false otherwise.
See also mapMode() and QAbstractVideoBuffer::MapMode.
Identifies whether a video frame is valid.
An invalid frame has no video buffer associated with it.
Returns true if the frame is valid, and false if it is not.
Identifies if the mapped contents of a video frame will be persisted when the frame is unmapped.
This is a convenience function which checks if the MapMode contains the QAbstractVideoBuffer::WriteOnly flag.
Returns true if the video frame will be updated when unmapped, and false otherwise.
Note: The result of altering the data of a frame that is mapped in read-only mode is undefined. Depending on the buffer implementation the changes may be persisted, or worse alter a shared buffer.
See also mapMode() and QAbstractVideoBuffer::MapMode.
Maps the contents of a video frame to memory.
The map mode indicates whether the contents of the mapped memory should be read from and/or written to the frame. If the map mode includes the QAbstractVideoBuffer::ReadOnly flag the mapped memory will be populated with the content of the video frame when mapped. If the map mode inclues the QAbstractVideoBuffer::WriteOnly flag the content of the mapped memory will be persisted in the frame when unmapped.
While mapped the contents of a video frame can be accessed directly through the pointer returned by the bits() function.
When access to the data is no longer needed be sure to call the unmap() function to release the mapped memory.
Returns true if the buffer was mapped to memory in the given mode and false otherwise.
See also unmap(), mapMode(), and bits().
Returns the mode a video frame was mapped to system memory in.
See also map() and QAbstractVideoBuffer::MapMode.
Returns the number of bytes occupied by the mapped frame data.
This value is only valid while the frame data is mapped.
See also map().
Returns the color format of a video frame.
Returns an video pixel format equivalent to an image format. If there is no equivalent format QVideoFrame::InvalidType is returned instead.
Sets the presentation time when a frame should stop being displayed.
See also endTime().
Sets the field an interlaced video frame belongs to.
See also fieldType().
Sets the presentation time when the frame should be displayed.
See also startTime().
Returns the size of a video frame.
Returns the presentation time when the frame should be displayed.
See also setStartTime().
Releases the memory mapped by the map() function.
If the MapMode included the QAbstractVideoBuffer::WriteOnly flag this will persist the current content of the mapped memory to the video frame.
See also map().
Returns the width of a video frame.
Assigns the contents of other to a video frame.
© 2008-2011 Nokia Corporation and/or its subsidiaries. Nokia, Qt and their respective logos are trademarks of Nokia Corporation in Finland and/or other countries worldwide.
All other trademarks are property of their respective owners. Privacy Policy
Licensees holding valid Qt Commercial licenses may use this document in accordance with the Qt Commercial License Agreement provided with the Software or, alternatively, in accordance with the terms contained in a written agreement between you and Nokia.
Alternatively, this document may be used under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation.