/**************************************************************************** ** ** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies). ** All rights reserved. ** Contact: Nokia Corporation (qt-info@nokia.com) ** ** This file is part of the examples of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:BSD$ ** You may use this file under the terms of the BSD license as follows: ** ** "Redistribution and use in source and binary forms, with or without ** modification, are permitted provided that the following conditions are ** met: ** * Redistributions of source code must retain the above copyright ** notice, this list of conditions and the following disclaimer. ** * Redistributions in binary form must reproduce the above copyright ** notice, this list of conditions and the following disclaimer in ** the documentation and/or other materials provided with the ** distribution. ** * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor ** the names of its contributors may be used to endorse or promote ** products derived from this software without specific prior written ** permission. ** ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." ** $QT_END_LICENSE$ ** ****************************************************************************/ #include "spectrumanalyser.h" #include "utils.h" #include <QtCore/qmath.h> #include <QtCore/qmetatype.h> #include <QtMultimedia/QAudioFormat> #include <QThread> #include "fftreal_wrapper.h" SpectrumAnalyserThread::SpectrumAnalyserThread(QObject *parent) : QObject(parent) #ifndef DISABLE_FFT , m_fft(new FFTRealWrapper) #endif , m_numSamples(SpectrumLengthSamples) , m_windowFunction(DefaultWindowFunction) , m_window(SpectrumLengthSamples, 0.0) , m_input(SpectrumLengthSamples, 0.0) , m_output(SpectrumLengthSamples, 0.0) , m_spectrum(SpectrumLengthSamples) #ifdef SPECTRUM_ANALYSER_SEPARATE_THREAD , m_thread(new QThread(this)) #endif { #ifdef SPECTRUM_ANALYSER_SEPARATE_THREAD // moveToThread() cannot be called on a QObject with a parent setParent(0); moveToThread(m_thread); m_thread->start(); #endif calculateWindow(); } SpectrumAnalyserThread::~SpectrumAnalyserThread() { #ifndef DISABLE_FFT delete m_fft; #endif } void SpectrumAnalyserThread::setWindowFunction(WindowFunction type) { m_windowFunction = type; calculateWindow(); } void SpectrumAnalyserThread::calculateWindow() { for (int i=0; i<m_numSamples; ++i) { DataType x = 0.0; switch (m_windowFunction) { case NoWindow: x = 1.0; break; case HannWindow: x = 0.5 * (1 - qCos((2 * M_PI * i) / (m_numSamples - 1))); break; default: Q_ASSERT(false); } m_window[i] = x; } } void SpectrumAnalyserThread::calculateSpectrum(const QByteArray &buffer, int inputFrequency, int bytesPerSample) { #ifndef DISABLE_FFT Q_ASSERT(buffer.size() == m_numSamples * bytesPerSample); // Initialize data array const char *ptr = buffer.constData(); for (int i=0; i<m_numSamples; ++i) { const qint16 pcmSample = *reinterpret_cast<const qint16*>(ptr); // Scale down to range [-1.0, 1.0] const DataType realSample = pcmToReal(pcmSample); const DataType windowedSample = realSample * m_window[i]; m_input[i] = windowedSample; ptr += bytesPerSample; } // Calculate the FFT m_fft->calculateFFT(m_output.data(), m_input.data()); // Analyze output to obtain amplitude and phase for each frequency for (int i=2; i<=m_numSamples/2; ++i) { // Calculate frequency of this complex sample m_spectrum[i].frequency = qreal(i * inputFrequency) / (m_numSamples); const qreal real = m_output[i]; qreal imag = 0.0; if (i>0 && i<m_numSamples/2) imag = m_output[m_numSamples/2 + i]; const qreal magnitude = sqrt(real*real + imag*imag); qreal amplitude = SpectrumAnalyserMultiplier * log(magnitude); // Bound amplitude to [0.0, 1.0] m_spectrum[i].clipped = (amplitude > 1.0); amplitude = qMax(qreal(0.0), amplitude); amplitude = qMin(qreal(1.0), amplitude); m_spectrum[i].amplitude = amplitude; } #endif emit calculationComplete(m_spectrum); } //============================================================================= // SpectrumAnalyser //============================================================================= SpectrumAnalyser::SpectrumAnalyser(QObject *parent) : QObject(parent) , m_thread(new SpectrumAnalyserThread(this)) , m_state(Idle) #ifdef DUMP_SPECTRUMANALYSER , m_count(0) #endif { CHECKED_CONNECT(m_thread, SIGNAL(calculationComplete(FrequencySpectrum)), this, SLOT(calculationComplete(FrequencySpectrum))); } SpectrumAnalyser::~SpectrumAnalyser() { } #ifdef DUMP_SPECTRUMANALYSER void SpectrumAnalyser::setOutputPath(const QString &outputDir) { m_outputDir.setPath(outputDir); m_textFile.setFileName(m_outputDir.filePath("spectrum.txt")); m_textFile.open(QIODevice::WriteOnly | QIODevice::Text); m_textStream.setDevice(&m_textFile); } #endif //----------------------------------------------------------------------------- // Public functions //----------------------------------------------------------------------------- void SpectrumAnalyser::setWindowFunction(WindowFunction type) { const bool b = QMetaObject::invokeMethod(m_thread, "setWindowFunction", Qt::AutoConnection, Q_ARG(WindowFunction, type)); Q_ASSERT(b); Q_UNUSED(b) // suppress warnings in release builds } void SpectrumAnalyser::calculate(const QByteArray &buffer, const QAudioFormat &format) { // QThread::currentThread is marked 'for internal use only', but // we're only using it for debug output here, so it's probably OK :) SPECTRUMANALYSER_DEBUG << "SpectrumAnalyser::calculate" << QThread::currentThread() << "state" << m_state; if (isReady()) { Q_ASSERT(isPCMS16LE(format)); const int bytesPerSample = format.sampleSize() * format.channels() / 8; #ifdef DUMP_SPECTRUMANALYSER m_count++; const QString pcmFileName = m_outputDir.filePath(QString("spectrum_%1.pcm").arg(m_count, 4, 10, QChar('0'))); QFile pcmFile(pcmFileName); pcmFile.open(QIODevice::WriteOnly); const int bufferLength = m_numSamples * bytesPerSample; pcmFile.write(buffer, bufferLength); m_textStream << "TimeDomain " << m_count << "\n"; const qint16* input = reinterpret_cast<const qint16*>(buffer); for (int i=0; i<m_numSamples; ++i) { m_textStream << i << "\t" << *input << "\n"; input += format.channels(); } #endif m_state = Busy; // Invoke SpectrumAnalyserThread::calculateSpectrum using QMetaObject. If // m_thread is in a different thread from the current thread, the // calculation will be done in the child thread. // Once the calculation is finished, a calculationChanged signal will be // emitted by m_thread. const bool b = QMetaObject::invokeMethod(m_thread, "calculateSpectrum", Qt::AutoConnection, Q_ARG(QByteArray, buffer), Q_ARG(int, format.frequency()), Q_ARG(int, bytesPerSample)); Q_ASSERT(b); Q_UNUSED(b) // suppress warnings in release builds #ifdef DUMP_SPECTRUMANALYSER m_textStream << "FrequencySpectrum " << m_count << "\n"; FrequencySpectrum::const_iterator x = m_spectrum.begin(); for (int i=0; i<m_numSamples; ++i, ++x) m_textStream << i << "\t" << x->frequency << "\t" << x->amplitude<< "\t" << x->phase << "\n"; #endif } } bool SpectrumAnalyser::isReady() const { return (Idle == m_state); } void SpectrumAnalyser::cancelCalculation() { if (Busy == m_state) m_state = Cancelled; } //----------------------------------------------------------------------------- // Private slots //----------------------------------------------------------------------------- void SpectrumAnalyser::calculationComplete(const FrequencySpectrum &spectrum) { Q_ASSERT(Idle != m_state); if (Busy == m_state) emit spectrumChanged(spectrum); m_state = Idle; }
© 2008-2011 Nokia Corporation and/or its subsidiaries. Nokia, Qt and their respective logos are trademarks of Nokia Corporation in Finland and/or other countries worldwide.
All other trademarks are property of their respective owners. Privacy Policy
Licensees holding valid Qt Commercial licenses may use this document in accordance with the Qt Commercial License Agreement provided with the Software or, alternatively, in accordance with the terms contained in a written agreement between you and Nokia.
Alternatively, this document may be used under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation.