MeeGo 1.2 Harmattan Developer Documentation Develop for the Nokia N9

Flashing in Mac

Note: Make sure that device battery is fully charged before any flashing operations.

To flash your Nokia N950 device, follow these steps:

1. Go to Nokia N9 Developer site and download OneClickFlasher from the link Nokia N950 firmware updates.

2. Enter the following command:

chmod 755 <name of the downloaded file>

3. To start OneClickFlasher, use the following command:

sh ./<file name of the downloaded binary>.bin.sh

4. Wait until the following text is displayed:

Suitable USB interface (bootloader/phonet) not found, waiting...

5. Ensure that the device is switched off, then connect the device and the host workstation with the USB cable.

6. When you connect the cable, the device displays the text "NOKIA" and switches on automatically.

7. Wait until the device is flashed. This may take a few minutes. When flashing is complete, the following text is displayed:

Flashing image ...DONE
Press Enter to exit .. &
Unplug the USB cable from the device to boot new flashed image ...

8. Press Enter on the host workstation keyboard.

9. Disconnect the USB cable. The device boots up and is ready for use. All the installed files are uninstalled from the host workstation.