Katastrophos.net Blog » HSDPA http://katastrophos.net/andre/blog Chaotic solutions and random thoughts from the restless mind of a notorious problem solver (TM), by Andre Beckedorf Wed, 08 Feb 2012 00:04:38 +0000 en hourly 1 http://wordpress.org/?v=3.3.2 Replacing the hinge and LCD back cover of a Fujitsu LifeBook U2010 / U820 http://katastrophos.net/andre/blog/2010/09/30/replacing-the-hinge-and-lcd-back-cover-on-a-fujitsu-lifebook-u2010-u820/ http://katastrophos.net/andre/blog/2010/09/30/replacing-the-hinge-and-lcd-back-cover-on-a-fujitsu-lifebook-u2010-u820/#comments Thu, 30 Sep 2010 18:30:23 +0000 Andre Beckedorf http://katastrophos.net/andre/blog/?p=352 I recently had to replace the hinge on my Fujitsu U2010, not because the hinge itself broke, but rather because I damaged the cable on one of my recent hacks. Fortunately I only damaged a part of the USB cable that connects the webcam to the mainboard. However, the cable harness is contained in the display hinge and can not be replaced separately, so I had to buy the whole part.
The replacement procedure is quite involving and delicate. While I was at it I also replaced the back cover of the display on my unit and replaced the pink back cover (my U2010 is a second hand unit) with a beautiful black cover. However, the particular cover I bought was from the US 3G version of the U820 – the one with the retractable antenna. I was not able to find the antenna assembly part so I had to brew my own…

The Original Fujitsu U820 with the 3G option LCD touch display with the bezel removed The touch panel (Word of warning: Do not separate the touch panel from the LCD, never ever. I mean it.) The WXGA TFT display (Word of warning: Do not separate the touch panel from the LCD, never ever. I mean it.) Touch panel, LCD and auxiliary boards/circuits removed Hinge removed from the base and back cover DIY antenna assembly with the WLAN/3G antenna (Apple branded) The new hinge attached to the new display back cover Installing the DIY 3G antenna, here locked in place. Checking the retainer Reassembled display with hinge Almost finished 3G antenna pulled out Antenna snapped in Backside Old and ugly display back cover next to the finished unit. OMG PONIES!!1 ]]> http://katastrophos.net/andre/blog/2010/09/30/replacing-the-hinge-and-lcd-back-cover-on-a-fujitsu-lifebook-u2010-u820/feed/ 3 Retrofitting the Fujitsu LifeBook U820/U2010 with 3G/UMTS/HSDPA http://katastrophos.net/andre/blog/2009/07/31/retrofitting-the-fujitsu-lifebook-u2010-with-3gumtshsdpa/ http://katastrophos.net/andre/blog/2009/07/31/retrofitting-the-fujitsu-lifebook-u2010-with-3gumtshsdpa/#comments Fri, 31 Jul 2009 15:05:54 +0000 Andre Beckedorf http://katastrophos.net/andre/blog/?p=208 So, I replaced my U810 with the newer U2010 model a few weeks back. Contrary to the U810 the U2010 has an empty and functional Mini PCI-E slot. I am using the O2 Internet-Pack L plan here in Germany a lot and tethered my Sony Ericsson K850 with the U810 before, which was quite a problem since this setup used to drain the batteries of my mobile phone quite fast due to UMTS/HSDPA + Bluetooth connectivity. I figured an internal solution would work better in my case. :)
The Novatel Expedite EU850D Mini PCI-E card seems like a good fit since it already includes a SIM card slot on board and is readily available via several retailers.
The big problem with this solution however is the fact that the U2010 is so crammed internally that it is hard to add any new conventionally available antennas. The device already has six antennas: two for Wifi, two for GPS, one for Bluetooth and one for the FM Transmitter. However I was not able to use any of these without sacrificing the functionality of these connectivity options.
Some retailers offer antennas with the module which are to be installed in the display lid and are too big to fit into the casing of the U2010. I refrained from opening up the lid and was looking for a different solution instead:
Why not use the same antenna a mobile phone uses?
As luck had it, a friend of mine had a broken Sony Ericsson K800i lying around, which I took apart and removed the antenna assembly from. You can also get the whole assembly as replacement part from several dealers at eBay. Fortunately the antenna is a film based one which can be stripped away from the plastic part it is fixed on. Due to the flexible form of the antenna you are free to place it almost anywhere in the case.
So I got an antenna cable with a Hirose U.FL / IPAX pigtail and soldered the other end of the cable onto the copper pads of the film antenna.

Mainboard of the U2010 with additional modules Wifi module underneath the mainboard of the U2010 Empty unshielded place for the antenna Sony Ericsson K800 UMTS/HSDPA antenna + buzzer assembly Peeled off film antenna of the K800i Backside of the film antenna Film antenna with soldered cable and U.FL pigtail Antenna installed in place Antenna installed in place 2

If you intend to do the same here is a word of warning: Be sure to use a placement inside the casing that is not covered by the silvery radiation shield coating as it will dramatically reduce the reception quality of the signal. I had to sand down some of the coating to get better signal strength. Your mileage may vary.

]]> http://katastrophos.net/andre/blog/2009/07/31/retrofitting-the-fujitsu-lifebook-u2010-with-3gumtshsdpa/feed/ 11